Cisco C7200-I - Input/Output Controller - Control Processor User Manual - Page 14
Browse online or download pdf User Manual for Network Hardware Cisco C7200-I - Input/Output Controller - Control Processor. Cisco C7200-I - Input/Output Controller - Control Processor 16 pages. Input/output controllers
Print Page
show interfaces gigabitethernet
show interfaces gigabitethernet
To check the status and configuration settings of the Gigabit Ethernet interface of the
Cisco 7200-I/O-GE+E, use the show interfaces gigabitethernet privileged EXEC command.
Syntax Description
slot
port
Defaults
No default behavior or values.
Command Modes
Privileged EXEC
Command History
Release
11.1 CC
12.1(3a)E
12.1(5)T
12.2(14)S
Usage Guidelines
This command is used on the Cisco 7200-I/O-GE+E to display the configuration status of the
Gigabit Ethernet interface. Slot 0 is always reserved for the Gigabit Ethernet port on the I/O controller.
12.1(5)T and 12.2(14) S
14
show interfaces gigabitethernet slot/port
Slot number on the interface.
Port number on the interface.
Modification
This command was introduced.
Support for the Cisco 7200-I/O-GE+E controller was introduced.
This command was integrated into Cisco IOS Release 12.1(5)T.
This command was integrated into Cisco IOS Release 12.2(14)S.
Cisco 7200-I/O-GE+E and Cisco 7200-I/O-2FE/E Input/Output Controllers