Argo TB200 Instruction Manual - Page 8

Browse online or download pdf Instruction Manual for Binding Machine Argo TB200. Argo TB200 10 pages. Thermal binding machine

Print Page

OPERATION

POWER ON AND OFF

Connect the machine's plug to socket-outlet, press ON/OFF power button, the LED over

power button will turn RED.

To turn off this laminator, press ON/OFF power button. Remember, there's still weak electric

current inside. If you would not use this machine for a certain while, please pull out the

plug from the socket-outlet to shut it off completely to save energy.

HOW TO OPERATE THE THERMAL BINDING FUNCTION

After pulling out the cooling rack and pressing ON/OFF power button. The "Bind LED" turns

red and flashes, which means current status is for thermal binding and machine is warming

up. In less than 3 minutes, buzzer sounds "Bi~" and LED turns into green and stays steady.

It is ready for thermal binding.

Put in the documents from the top entry of the machine, and press button "Counter". "Bind

LED" turns red and flashes again. In one minute , buzzer sounds "Bi-Bi-Bi" and LED turns

into green and stays steady at the same time. The thermal binding job is finished. Please

pick up the documents and put it against the cooling rack to cool down the temperature

of the documents.

AUTO SHUTOFF

To save precious energy, this machine is designed to shut off automatically when not used

over 90 minutes. When this happens, all LEDs turn off. However there's still weak electric

current inside, so if you do not use this machine in a certain period, please pull out the plug

from the socket-outlet to shut it off completely.

When the machine shuts off automatically, please press ON/OFF power button switch to

restart the machine.

MAINTENANCE AND WARNING

Make sure that this plug of the machine is pulled out from the socket-outlet, before

cleaning or moving it around.

Do not use this machine in damp conditions.

Do not let the children play with this machine without the supervision of an adult.

It is hot and dangerous.

Do not bind more than 200 sheets of 70gsm paper A4 size.

DEFECTS

In case of any defects, the thermal binding machine should be delivered to the seller or

authorized service together with the warranty and damage description. Equipment should

be secured with proper packaging (preferably original carton box). The seller does not take

responsibility for any consequences of transporting equipment not properly packed.