Cisco Catalyst 2960-X Getting Started Manual - Page 13
Browse online or download pdf Getting Started Manual for Network Hardware Cisco Catalyst 2960-X. Cisco Catalyst 2960-X 25 pages.
Also for Cisco Catalyst 2960-X: Hardware Installation Manual (34 pages), Hardware Manual (20 pages)
Print Page
Stack Cabling
These figures show the switches stacked in a vertical rack or on a table. The connections are redundant. A Catalyst 2960-X switch
is shown in the examples, the Catalyst 2960-XR switch can be stacked in the same way.
Figure 2: Stacking Switches with the 0.5-meter FlexStack Cable
Figure 3: Stacking Switches with 0.5-meter and 3-meter FlexStack Cables
Installing the Switch
This section describes basic 19-inch rack-mounting. See the hardware installation guide for other optional bracket information. For
alternate mounting procedures, such as installing the switch in a 24-inch rack or on a wall, and for additional cabling information,
see the hardware installation guide on Cisco.com.
Tools and Equipment
Obtain these necessary tools and equipment:
• A number-2 Phillips screwdriver to rack-mount the switch.
13