Argo XP5 Instruction Manual - Page 14

Browse online or download pdf Instruction Manual for Binding Machine Argo XP5. Argo XP5 18 pages. Electric binding machine 2 in 1

Print Page
6.
Extra large format punching guide: on the extra large format punching guide by pull-
ing the pin adequate to the chosen type of comb.
7.
Punch the document by moving the paper from right to left, placing the last hole
in the pin (adequate to chosen type of comb). Align the paper into the paper entry
properly, it will allow you to do continuous punching accurately.
8.
Empty the waste paper tray at the right side of the machine. Frequent clearing
is required.
PLASTIC COMB BINDING
1
1.
Insert a plastic comb onto the binding mechanism, opening faced upwards. Pull over
the binding handle to open it.
2.
Place punched sheets directly onto the opened comb.
3.
Return the binding handle to its original position. Remove the binded document.
WIRE COMB BINDING
1
4
1.
Insert a wire onto the wire holder, placed on the front of the machine.
2.
Load punched sheets directly onto the wire loops
3.
Set the wire closure control for the desired wire's size.
4.
Remove the binded document from the wire holder. Put it down in the wire closure
control (opening faced inside) and let the wire loops rest fully into the wire closing
channel.
© ARGO S.A.
EN
2
2
5
14
3
3
6
www.argo.pl