DIGITIZE System 3505 Installation And Operation Manual - Page 14
Browse online or download pdf Installation And Operation Manual for Measuring Instruments DIGITIZE System 3505. DIGITIZE System 3505 20 pages. Remote alarm terminal option
Also for DIGITIZE System 3505: Operation Manual (12 pages)
Print Page2.1 ZONE DEFINITION
The BT units will send zones 1 – 16 based on the model of the BT in the field and the
number of zones activated when the BT is first brought on line.
The SYSTEM 3505 will process these zones as the BT number, a hyphen, and then the
zone number. Thus if zone eight is activated on BT #56 the resulting account number
will be 56-08. Other conditions reported by the BT unit are not associated with a zone
number. These conditions include AC FAIL, Battery FAIL and Tamper. The SYSTEM
3505 assigns a zone number well above the rand of 1 – 16 to signify conditions that do
not directly have zone numbers. The zone range selected by Digitize is zone -91 to -98.
The following is a definition of this zone range:
Each BT (or repeater) will use these zone definitions to report conditions other then
zones. These conditions will always be reported as a Trouble, never an Alarm.
2.2 REPEATER ACCOUNT NUMBERS
The Repeaters used in the Indian Island Monaco SYSTEM produce error signals. I.e.
AC/DC failures, Repeater down, etc. In order to process these conditions to the RDC via
the SYSTEM 3505, the repeater Troubles needed to have an account number assigned.
An account of 9991 was selected to distinguish it from a BT account number. Thus an
AC failure at a repeater will be reported as 9991-97.
DIGITIZE, INC. 700270 REV A 01/06
Specifications Subject to Change Without Notice
-91 BT-2 is Out of Service
-93 No response from BT-2
-94 BT has a low Battery
-95 (not assigned at this time)
-96 Panel Trouble (repeater)
-97 BT has an AC failure
-98 Tamper
OPERATION
2-1