DIGITIZE System 3505 Operation Manual - Page 7

Browse online or download pdf Operation Manual for Server DIGITIZE System 3505. DIGITIZE System 3505 12 pages. Remote alarm terminal option
Also for DIGITIZE System 3505: Installation And Operation Manual (20 pages)

Print Page
The display screen indicates "Engine 28 OK" should three taps be decoded on CKT
56.
Whenever the radio beep is activated on any slave or the master SYSTEM 3505, the
Master SYSTEM 3505 will indicate that the radio beep is active. If the radio beep
signal is activated for more then ten seconds, the Master RAT will automatically kill
the radio beep signal. A printed message will advise you that the signal has been
terminated. The beep ON message shall remain on the display until the input
condition is cleared. For Custom #0101, excludes Slave # located in Police Hdqtrs.
When two or more rounds result in the same number being decoded, the word Read
will appear on the display. If the circuit was in the test mode, then the word TEST
will be displayed in lieu of READ. Pressing clear will clear the first box on the
display. The "3" on the top right of the display indicates the top line will auto clear in
3 seconds.
DIGITIZE, INC. 700251 REV B 04/02
7
Specifications Subject to Change Without Notice