Cisco Catalyst 3750-E Series Getting Started Manual - Page 6

Browse online or download pdf Getting Started Manual for Network Hardware Cisco Catalyst 3750-E Series. Cisco Catalyst 3750-E Series 27 pages. Switches and power supply modules
Also for Cisco Catalyst 3750-E Series: Getting Started Manual (33 pages), Product Support Bulletin (6 pages), Product Support Bulletin (5 pages), Product Support Bulletin (6 pages), Installation Notes (20 pages)

Print Page

The Express Setup Basic Settings page appears. If it does not appear, see the "In Case of

Step 12

Difficulty" section on page 22.

Enter this information in the Network Settings fields:

Step 13

• In the Management Interface (VLAN ID) field, the default is 1. Enter a new VLAN ID

only if you want to change the management interface through which you manage the

switch. The VLAN ID range is 1 to 4094.

• In the IP Address field, enter the IP address of the switch. In the IP Subnet Mask field,

click the drop-down arrow, and select an IP Subnet Mask.

• In the Default Gateway field, enter the IP address for the default gateway (router).

• Enter your password in the Switch Password field. The password can be from 1 to 25

alphanumeric characters, can start with a number, is case sensitive, allows embedded

spaces, but does not allow spaces at the beginning or end. In the Confirm Switch

Password field, enter your password again.

Note

You must change the password from the default password,

(Optional) Enter this information in the Ethernet Management Port Settings fields:

Step 14

• In the IP Address field, enter the IP address of the Ethernet management port. In the

IP Subnet Mask field, click the drop-down arrow, and select an IP Subnet Mask.

cisco .