Argo Lab AM 40-D Pro User Manual - Page 4
Browse online or download pdf User Manual for Laboratory Equipment Argo Lab AM 40-D Pro. Argo Lab AM 40-D Pro 5 pages. Mechanical rod stirrer
Print PageCleaning and maintenance
•
Proper maintenance of the instrument guarantees its good condition and extends its life;
•
Disconnect the power supply cable during cleaning;
•
During cleaning, be careful not to spray the detergent inside the instrument;
•
Use only non-aggressive detergents that do not contain corrosive substances;
•
Before proceeding with cleaning or with any decontamination, the user must ensure that the method adopted
does not damage the instrument;
•
Wear appropriate protections when cleaning with chemicals;
•
If the instrument is to be sent to technical assistance, it is necessary to provide for proper cleaning and possible
decontamination by pathogens of the same. It is also advisable to put the instrument back in its initial packaging
to send it to the repair service.
Reference standards
The instrument was built in compliance with the following safety regulations:
EN 61010-1
UL 3101-1
CAN/CSA C22.2(1010-1) EN 61010-2-10
The instrument has been manufactured in compliance with the following EMC standards:
EN 61326-1
European guidelines:
EMC-guidelines: 89/336/EWG
Machine guidelines: 73/023/EWG
Technical features
Maximum amount of stirring (water)
Absorbed power
Power supplied
Voltage
Frequency
Consumption
Speed range
Display type
Display speed accuracy
Maximum torque
Overload protection
Motor protection
Maximum viscosity
Spindle diameter range
Dimensions (L x W x H)
Weight
Protection class DIN / EN60529
Working temperature
Permissible relative humidity
RS232 interface
40 liters
120 W
100 W
100 – 240 V
50/60 Hz
130 W
50 – 2200 rpm
LCD
±1 rpm
60 Ncm
Flashing led, auto stop
Flashing led, auto stop
50000 mPas
0,5 – 13 mm
220 x 186 x 83 mm
2,8 kg
IP42
5 – 40 °C
80%
Yes
UM Agitatore meccanico digitale ad asta AM 40-D Pro ENG rev.0 12.05.2020