Cisco Catalyst 7500 Series Configuration Manual - Page 50

Browse online or download pdf Configuration Manual for Network Hardware Cisco Catalyst 7500 Series. Cisco Catalyst 7500 Series 50 pages. Chassis interface board
Also for Cisco Catalyst 7500 Series: Datasheet (11 pages), Troubleshooting Manual (11 pages), Replacing Manual (40 pages)

Cisco Catalyst 7500 Series Configuration Manual
Spectralink VIEW Certified Configuration Guide: Cisco Controllers and APs

Setting up the EDCA parameters profile

The EDCA parameters must be set to the WMM setting after the WLAN network QoS has been
set.

Configuration for 5 GHz

1
In the navigation pane under 802.11a/n, select EDCA Parameters.
2
Ensure that WMM is selected from the drop-down list.
3
Click Apply.

Configuration for or 2.4 GHz

1
In the navigation pane under 802.11b/g/n, select EDCA Parameters.
2
Ensure that WMM is selected from the drop-down list.
3
Click Apply.
Congratulations! The Cisco controller and its AP's are now set up for interoperability with Spectralink
handsets in WMM QoS mode.
721-1001-000-AH.docx
December 2016
50