Cisco Catalyst X6148 Datasheet - Page 17
Browse online or download pdf Datasheet for Network Hardware Cisco Catalyst X6148. Cisco Catalyst X6148 18 pages. Catalyst 6500 series 10/100 and 10/100/1000 ethernet interface modules
Also for Cisco Catalyst X6148: Notice (4 pages), Datasheet (9 pages)
Print Page
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
EN 60825
●
21CFR1040
●
EMC Compliance
FCC Part 15 (CFR 47) Class A
●
VCCI Class A with UTP, Class B with STP
●
EN55022 Class A with UTP, Class B with STP
●
CISPR 22 Class A with UTP, Class B with STP
●
CE marking
●
AS/NZS 3548 Class A with UTP, Class B with STP
●
Network Management
ETHERLIKE-MIB (RFC 1643)
●
IF-MIB (RFC 1573)
●
Bridge MIB (RFC 1493)
●
CISCO-STACK-MIB
●
CISCO-VTP-MIB
●
CISCO-CDP-MIB
●
RMON MIB (RFC 1757)
●
CISCO-PAGP-MIB
●
CISCO-STP-Extensions-MIB
●
CISCO-VLAN-Bridge-MIB
●
CISCO-VLAN-Membership-MIB
●
CISCO-UDLDP-MIB
●
CISCO-ENTITY-FRU-CONTROL-MIB
●
CISCO-COPS-CLIENT-MIB
●
ENTITY-MIB (RFC 2037)
●
HC-RMON
●
RFC1213-MIB (MIB-II)
●
SMON-MIB
●
Inline-Power Specifications
IEEE 802-3af: Output power per port: Typically 54V up to 350 mA
●
Cisco Prestandard: Output power per port: Typically 42V up to 166 mA
●
Pin assignment: 1, 2, 3, and 6
●
Maximum Station-to-Station Cabling Distance
10/100BASE-TX, 100BASE-TX Fast Ethernet, and 10, 100, and 1000 Mbps: Category 5,
●
5e, and 6 UTP: 328 ft (100m), 100-ohm STP: 328 ft (100m); half or full duplex
Maximum power: Off (maximum power condition not reached); on (maximum power
●
condition reached; no more phones will receive inline power from this module)
Indicators and Interfaces
Solution Overview
Page 17 of 18