Cisco Cisco mds 9216 - fabric switch Configuration Manual - Page 24

Browse online or download pdf Configuration Manual for Network Hardware Cisco Cisco mds 9216 - fabric switch. Cisco Cisco mds 9216 - fabric switch 49 pages. Multilayer fabric switch
Also for Cisco Cisco mds 9216 - fabric switch: Connection Manual (13 pages), Release Note (48 pages), Release Note (44 pages), Release Note (44 pages), Release Note (36 pages), Release Note (26 pages), Release Note (22 pages), Quick Reference Manual (14 pages), Release Note (3 pages), Specification (11 pages), Hardware Installation Manual (36 pages)

Print Page

Figure 13 Active Sessions tab—Connected status

Installing the EVA CCL Drivers on the iSCSI initiator

At this point, the Windows New Hardware Found Wizard may appear, because the EVA (Command

Console LUN) CCL was discovered by the operating system. This Wizard requires the following two ﬁles:

•

The EVA CCL driver—HsgCCL.inf

•

The Windows security ﬁle—HsgCCL.cat

These ﬁles are located on the Windows EVA Platform Kit CD. The Windows EVA Platform Kit can also

be downloaded from the HP web site:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?locBasepartNum=co-

17666-2

CAUTION:

Do not install the Windows EVA Platform Kit on the iSCSI server. Only extract the necessary ﬁles to

complete the EVA CCL Driver installation.

The following procedure is the same if you are loading the ﬁles from the CD or downloading from the

web site. To extract the HsgCCL.inf, and HsgCCL.cat ﬁles:

Copy the HP Package ﬁle \Setups\cp003937.exe to a temporary location on the iSCSI server.

Double click cp003937.exe to start the HP Package Setup.

The HP Package Setup Window appears.

Click Extract.

Select or create a temporary folder, and then click OK.

All ﬁles in the package are copied to the speciﬁed folder.

Resume the Windows Found New Hardware Wizard.

When prompted, point it to the temporary folder where the driver and security ﬁle reside.

Follow the instructions provided by the wizard.