Digitone ProSeries II Call Blocker Operation Manual - Page 9
Browse online or download pdf Operation Manual for Telephone Accessories Digitone ProSeries II Call Blocker. Digitone ProSeries II Call Blocker 17 pages. Automatically blocks and routes screened calls using caller id with back lighted display
Print Page
Clearing Blocked Numbers List Only Code 40
To delete just the blocked numbers already stored from using the Block Button or with
the Last Call Remote Entry command of * 2 #, use Code 40 # *. This lets you clear
out all the numbers that accumulated over the years and, also retains the known
unwanted blocked entries. All blocked numbers entered through programming Code 40
(not through the front panel BLOCK button) will be stored as Non Auto Delete Numbers
and won't be accidentally erased with this command.
Outgoing Call Blocking Code 42
The DPCB can block outbound dialed numbers by phones connected through the TEL
port.
To store a number, enter Programming, when the prompt for "Enter Code"
displays enter 42, followed by the [number you want blocked from dialing out] and then
* key to store it. Also, Code 42 [000] * can be used to disable access to the phone line
for (hospital patients) and play the busy signal. To access the phone line in an
emergency, dial * 0 # to get the dial tone for dialing out. The default is 42 [111] * for
full line access.
Blocked Number List Auto Delete Code 46 (Virtual Unlimited Memory Feature)
The DPCB can manage your blocked calls list automatically with First In and First Out
processing. With 800 memory slots available to block calls, it will be daunting to sort
through them line by line. However, the DPCB can use virtual memory by allowing the
first calls that may have come in years ago to be deleted automatically upon the
reception of newer calls today. To enable this mode, press and hold the Program Button
for 3 seconds until you see "Program Mode", then "Pick Up Phone", when the prompt
for "Enter Code" displays enter 46, display shows function. To return to the default
Manual delete mode when the prompt for "Enter Code" displays, enter 47.
Block Private Name Code 48
The DPCB can block the name Private with or without a phone number. Even though
you may have Anonymous Call Rejection from your phone company, scammers can still
get through just by adding a spoofed number, even your own. However, the DPCB will
block these calls that display the name as Private with or without a phone number. To
enable this mode, press and hold the Program Button for 3 seconds until you see
"Program Mode", then "Pick Up Phone", when the prompt for "Enter Code" displays
enter 48, display shows function. To return to the default mode when the prompt for
"Enter Code" displays, enter 49.
Inviting Individual Callers Code 50
Note that all callers with valid phone numbers are invited by default, so you don't need
to invite callers one at a time. However, if you are using the Global Block Method, then
this feature is useful for inviting callers that would otherwise be blocked. You can store
in individual callers as they call in like family, friends and business associates by using
the Invite Button on the front panel or use Program Code 50. To enable this feature,
press and hold the Program Button for 3 seconds until you see "Program Mode", then
"Pick Up Phone", when the prompt for "Enter Code" displays enter 50 to store a full
number followed by the * key. Example for an Invited number enter: 50, 894 555
1212 *. Store up to 80 numbers or area codes.
8