Digitone proseries blocker Operation Manual - Page 15
Browse online or download pdf Operation Manual for Cell Phone Digitone proseries blocker. Digitone proseries blocker 17 pages. Automatically blocks and routes screened calls with caller id
Print Page
"Regular Invited callers are not ringing through and, they are not on the blocked list."
You have enabled After Hours mode and only VIP callers can ring through to the TEL port. Regular
Invited callers can ring the line for voice mail messaging or to a second answering device during After
Hours, but not your phones in the TEL port.
"How do I allow Out of Area to ring through in Standard Mode for overseas calls?"
You can use Code 76 to override the block function for Out of Area + No Number call types or Code 74 to
override the block function for Private + No Number call types. These two codes will allow those callers
you want to hear from who are Out of Area (overseas) or Private (neighbors) to ring through.
2-Line Phones
The DPB is a single line operation and the 2-conductor line cord supplied with it only carries a single line.
If you want to process both lines on your 2-Line phone, then you will need: Two DPB with their supplied
single line cords, Two 2-Line Splitters with two single line cords and one Line Coupler. You will use one
splitter at the phone wall plate and connect the two supplied single line cords from each DPB to that
splitter; L1 to DPB 1 and L2 to DPB 2 then connect the two single line cords from each DPB TEL phone
port to the second line splitter L1 and L2. Connect this splitter to the Line Coupler and then connect the
2-Line phone to the coupler.
+
+
+
+
+
Wall Plate
2 Line Splitter
2 Line Splitter
Coupler
2-Line Phone
How do I connect the DPB to a DSL line?
Some DSL duplex filters have DSL Modem (ADSL) and Phone written on the filter jack, so you would
connect the DPB to the Phone port of that jack. If the DSL filter is a single port, then connect the DPB to
the DSL filter where your phone was connected, then connect your phone to the TEL port of the DPB.
If you have both DSL and cable systems, then the same is true for DSL above when you are using the
PSTN line for voice communication (telephone service). A DSL filter would not be used on a cable
modem if you get your telephone service there. Alternatively, you may have DSL filters for every phone
or device in service on the line. In which case you just connect the DPB to the DSL filter then to the
phone service.
DPB Compatibility *
Digitone's ProSeries Blocker works with all makes of analog telephony equipment and on all U.S.
Domestic and Foreign standard 2-wire telephone lines with FSK/DTMF (ETSI) Caller ID, DSL, FIOS, Cable
Modems and VoIP Digital services using (ATA) adapters from Skype™, Vonage™, Ooma™ or Magic
Jack™.
All trademarks, trade names, service marks and logos of respective manufacturers referenced
herein are registered trademarks of their respective companies.
14