Argom Tech A1002 Manual - Page 5

Browse online or download pdf Manual for Cell Phone Argom Tech A1002. Argom Tech A1002 16 pages.

Print Page
Number keys
* key
# key

First call

1> Insert the SIM cards (switch off the phone at first). For detailed installation guide, please refer to
"Installing the SIM card".
2> Charge the battery. Refer to "Battery and charging".
3> Press and hold the End key to switch on the mobile phone.
4> If the display prompts, enter the four-digit password and press "OK "key.
5> If the display prompts, enter the PIN code (provided together with the SIM card) and press" OK" key.
6> Enter area code and telephone number and then press the Call key/left soft key to dial out by SIM1/
SIM2 .
Note: Before using the mobile phone, please insert valid SIM cards and charge the battery.

Installing SIM cards and memory card

When you register mobile phone, you can apply for two different telephone numbers and two SIM cards
(Subscriber Identity Module). With the two cards, you can use the functions of the mobile phone. The SIM card
saves the parameters required by the communication, and personal information, including PIN code (personal
identity number), contacts, short messages and other system services.
Since the mobile phone doesn't have enough space, you may need to install a memory card (T-FLASH
card).
To install the T-FLASH card: open the rear cover, take out the battery, insert the T-FLASH card into the slot,
install the battery and then turn on the mobile phone. To remove the T-FLASH card: open the buckle and take
out the T-FLASH card, and then lock the buckle.
press this key to open/close the torch.
Dial numbers under standby mode and enter numbers and characters in
editing mode.
Under standby mode, press * key twice to display "+" to call international
numbers; "P" and "W" to call extension numbers. Under players and FM mode,
press * key to decrease volume.
Under standby mode, press and hold this key to switch between current
profile and meeting profile. Help to lock the keypad with pressing left soft key
first. Under players and FM mode, press # key to increase volume.

Getting started

5