Cisco Firepower 4150 Manual - Page 20

Browse online or download pdf Manual for Network Hardware Cisco Firepower 4150. Cisco Firepower 4150 42 pages. Rack-mount and ground the chassis
Also for Cisco Firepower 4150: Maintenance And Upgrade Manual (20 pages), Manual (36 pages), Manual (26 pages), Manual (8 pages), Getting Started (42 pages)

Print Page

1-Gb SX/10-Gb SR/10-Gb LR Network Module with Hardware Bypass

The following table describes the cable specifications needed to keep the insertion loss as low as possible.

Table 2: 40-Gb BASE-SR Cable Specifications

Interface

Ethernet 40-G BASE-SR4

850 nm wavelength

MPO-12 port adapter

Note

We recommend the following Cisco OM3 MTP/MPO cables.

Table 3: Cisco Cables

Cisco Part Number

CAB-ETH-40G-5M

CAB-ETH-40G-10M

CAB-ETH-40G-20M

1-Gb SX/10-Gb SR/10-Gb LR Network Module with Hardware Bypass

The following figure shows the front panel of the 1-Gb SX, 10-Gb SR and 10-Gb LR hardware bypass network

modules (FPR4K-NM-6X1SX-F, FPR4K-NM-6X10SR-F, FPR4K-NM-6X10LR-F). This is a single-wide

module that does not support hot swapping. The six ports are numbered from top to bottom, left to right. Pair

ports 1 and 2, 3 and 4, and 5 and 6 to form hardware bypass paired sets.

Note

Overview

BP (bypass LED):

• Green—In standby mode.

• Amber, flashing—Port is in hardware bypass

mode, failure event.

See the

Cisco 40GBASE QSFP Modules Data Sheet

Make sure you have the correct firmware package and software version installed to support this network

module. For instructions on how to verify your firmware package version and to upgrade the firmware if

necessary, see the

Cisco Firepower 4100/9300 FXOS Firmware Upgrade

FXOS Compatibility

for the software compatibility matrix.

Port 2 network activity LEDs:

• Amber—No connection, or port is not in use,

or no link or network failure.

• Green—Link up, no network activity.

• Green, flashing—Network activity.

Supported Cable

50 microns core diameter

2000/4700 (OM3/4) modal bandwidth (MHz*km)

50 m cable distance

for specifications of the QSFP for the 40-Gb BASE-SR-4.

Cable Length

5 m

10 m

20 m

Guide. See

Overview

Cisco Firepower 4100/9300