Cisco GLC-FE-100BX-U Maintenance And Troubleshooting Manual
Browse online or download pdf Maintenance And Troubleshooting Manual for Network Hardware Cisco GLC-FE-100BX-U. Cisco GLC-FE-100BX-U 17 pages. Small form-factor pluggable (sfp) transceiver modules
Also for Cisco GLC-FE-100BX-U: Datasheet (9 pages)
Print Page
Products & Services
Cisco Small Form-Factor Pluggable (SFP) Transceiver Modules Maintenance
and Troubleshooting
Document ID: 72370
Contents
Introduction
Prerequisites
Requirements
Components Used
The Link Does Not Come Up in the Sup720 Module with Line Cards WS-X6724-SFP and WS-
The WS-X6724-SFP Module with DFC3A Resets in Cisco Catalyst 6500 Switches That Run
Speeds Supported by the 1000BASE-T(GLC-T) SFP Module on the Cisco Catalyst 3750 Series
Use the 10-Gigabit Ethernet and Gigabit Ethernet SFP Ports of a SupII+10GE or SupV-10GE in
SPF Ports of the WS-X4506-GB-T Module or the WS-X4948 Chassis Do Not Come Up
SFP Interfaces of X2/Twin Gigabit Converter Do Not Come Up
The Links Do Not Come Up in Cisco 3800 Series Routers with SPFs for Connecting to Cisco
Introduction
This document provides information about the deployment and troubleshooting of Cisco Small Form-
Factor Pluggable (SFP) Transceiver Modules in Cisco Catalyst Switches. Cisco Transceiver Modules
support Ethernet, Sonet/SDH and Fibre Channel applications across all Cisco switching and routing
platforms. Cisco pluggable transceivers offer a convenient and cost effective solution for the adoption in
data centers, campuses, metropolitan area access and ring networks, and storage area networks.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
The information in this document is based on the Cisco SFP Transceiver Modules.