Cisco IAD2430 Series Overview Manual - Page 10

Browse online or download pdf Overview Manual for Network Hardware Cisco IAD2430 Series. Cisco IAD2430 Series 13 pages. Integrated access device
Also for Cisco IAD2430 Series: Overview (16 pages), Quick Start Manual (34 pages)

Cisco IAD2430 Series Overview Manual
Physical Description and LEDs
Table 1-3
No
3
4
Product Serial Number Location for Cisco IAD2430 Series IADs
The serial number label for the Cisco IAD2430 Series IADs is located on the rear of the chassis, in the
middle-left side. (See
Figure 1-14 Serial Number Locations
Note
The serial number for Cisco IAD2430 Series IADs is 11 characters long

Chassis Grounding

Chassis grounding is provided through the power cable, which uses a standard grounding plug. The
chassis is also equipped with two multi 4 x 0.7 screw terminals for chassis grounding. The accessory kit
contains a crimp-type ground lug that attaches to the two screw terminals. For more information, refer
to the

Port Numbering Conventions

Port numbering conventions for Cisco IAD2430 series IAD are as follows:
Cisco IAD2430 Series Integrated Access Devices Hardware Installation Guide
1-10
Cisco 2430 Series IAD LEDs (Cisco 2432-24FXS shown)
LED/Color
Link—green
100—green
FDX—green
ACT—green
SYS—green
PWR—green
Figure
1-14.)
A A A
N N N
N X X
X X
A A A N N N N X X X X
"Installing the Ground Connection" section on page
An external compact flash card is numbered CF 0.
10/100BASE-T ports are numbered 10/100BASE-T 0/0 and 10/100BASE-T 0/1 from right to left.
T1/E1 ports are numbered T1 or E1 1/0 and T1 or E1 1/1 from right to left.
Chapter 1
Description
Indicates link activity
100BASE-T active
Green when full duplex active, off when in half-duplex mode
Blinking green during packet transfer and interrupts
Blinking green for power on and self-test, solid green thereafter
Solid green when system has power
IA D 24 31
-8 FX S
3-11.
Overview of Cisco IAD2430 Series IADs
OL-4234-05