argon audio 7460A Owner's Manual - Page 3

Browse online or download pdf Owner's Manual for Speakers argon audio 7460A. argon audio 7460A 10 pages. Loudspeaker

Print Page

Running-in period

We recommend a running-in time of your new Argon

7460A/7450A loudspeakers of approximately 15-20 hours at

normal listening level before you decide on the final

positioning of the loudspeakers. During the running-in time

the drive units will settle in and perform as intended.

Connecting your loudspeakers

We recommend that you read the manual of your other

audio products carefully before connecting your

loudspeakers. Please switch off all equipment when

connecting your loudspeakers.

The speaker binding posts on the terminal accepts wire up

to Ø 4mm or cables with banana plugs.

Make sure that positive terminal binding posts on the

Passive speaker (marked + and colored red) are connected

to the positive output terminal binding posts on the Active

speaker and that the negative terminals on the Passive

speaker (marked – and colored black) are connected to the

negative output terminal on the Active speaker.

Now you can connect the audio source you want.

(read more about this on page 4 and forward).

Care and cleaning

We don't recommend use of any solvents or cleaners on

Argon 7460A/7450A cabinets, the cabinet surface usually

only requires dusting or cleaning with a damp soft cloth

(only use cold clean water).

Avoid touching the drive units, especially the tweeter, as

damage may result.

w w w . a r g o n a u d i o . c o m

7460

Environmental information

Argon 7460A/7450A loudspeakers comply with international

directives on the Restriction of Hazardous Substances

(RoHS) in electrical and electronic equipment and the

disposal of Waste.

Electrical and Electronic Equipment (WEEE) - the crossed

bin symbol indicates compliance and that the products must

be appropriately recycled or processed in accordance with

these directives.

Safety instructions

Please store this instruction manual for future reference.

Do not use this product near water or moisture. Clean only

with a dry cloth. Unplug this product from the wall outlet

before cleaning. Place the unit on a solid surface. Do not

block any ventilation openings. Do not put it in a closed

bookcase or a cabinet that may keep air from flowing

through its ventilation openings. Do not install near any heat

sources, such as radiators, heat registers, stoves or other

appliances that produce heat. Protect the power cord from

being walked on or pinched, particularly at plugs and the

point where they exit from the product. Servicing is required

when the product has been damaged. Do not attempt to

service this product yourself. Opening or removing covers

may expose you to dangerous voltages or other hazards.

Please contact the manufacturer to be referred to an

authorized service center near you. To prevent risk of fire or

electric shock, avoid over loading wall outlets, extension

cords, or integral convenience receptacles. Do not let

objects or liquids enter the product. Use proper power

sources. Plug the product into a proper power source, as

described in the operating instructions or as marked on the

product.

50A