argon audio DAB1 Quick Start - Page 2

Browse online or download pdf Quick Start for Radio argon audio DAB1. argon audio DAB1 2 pages.

Print Page
Quick start
Start up
1.
Extend the Antenna
2.
Plug the Power supply into an electric outlet and
into the back of the Radio.
3.
The Radio will start searching for DAB stations
automatically. This may take a few minutes and
the progress will be shown in the display.
4.
Once finished searching, the Radio will start
playing the first found station.
Basic Operating
1.
Stations can be chosen by turning the
"Tuning/Select" knob.
2.
Once the prefer station is found press the
"Tuning/Select" knob and the chosen station will
start playing.
3.
To store a station on one of the 1-5 preset
buttons, press and hold the wished preset button
for 3 sec., while playing the station that you want
to store.
4.
When stored, the display will show "Preset X
saved"
5.
To change between the Modes DAB, FM, AUX
and Bluetooth (if your Radio has this function),
press the "Source" button repeatedly until you
reach the preferred Mode.
6.
To tune stations in FM Mode press and hold the
"Autotune" button for 3 sec. and the Radio will
scan to the next available station. You can store
FM stations like mentioned in point 3.
Other Operating functions
Inactive standby
w w w . a r g o n a u d i o . c o m
7.
Bluetooth (only If your product have Bluetooth
function). To pair and connect to a Bluetooth
player device (Tablet, Laptop, Mobile Phone etc),
press the Bluetooth symbol button on the Radio
and the Radio will go into Bluetooth mode.
Activate Bluetooth on your Player device and let it
scan for Bluetooth devices. When the Argon
Audio Radio is found, paired and connect via your
Player, you can start play back immediately. If
your Player asks for a pin code, put in "0000". For
more Bluetooth operating instructions, look in the
full User manual from www.argonaudio.com
The Radio is default out-of-the-box set to turn off
automatically after 120 minutes without any
manual operation of the Radio. To change this
feature:
1.
Access Inactive standby settings by pressing the
Tuning/select (3) button/knob when <Inactive
standby> is shown in the display.
2.
To deactivate Inactive standby or to change the
Timeout period turn the Tuning/select (3)
button/knob until you reach your desired setting.
1.
Press the Tuning/select (3) button/knob to confirm
your choice.
You can find a full User Manual in PDF format
for this product on; www.argonaudio.com
Q u i c k s t a r t