Digitrax BDL162 Manual

Browse online or download pdf Manual for Security Sensors Digitrax BDL162. Digitrax BDL162 13 pages. Loconet occupancy detector

Print Page

BDL162

LocoNet Occupancy Detector

For 16 Detection Sections

Occupancy Detection for 16 detection sections lets you know when rolling

stock is in a detection section on your layout

Outputs for LEDs to indicate local detection section occupancy and zone

power status on a panel mount display

3 Amp capacity per detection section

Connect to LocoNet to transmit occupancy information to your LocoNet

system

Detects any powered locomotive

Detects un-powered rolling stock equipped with resistor wheel sets

Plug and Play with Digitrax DCC

Configurable for most DCC systems

Automatically checks layout status on power up of your system computer

Transponding with addition of an RX4 Transponder Detector and transpon-

ders in your rolling stock provides additional capabilities:

Identify where specific rolling stock is on your layout

Operations Mode Read Back allows you to read CV values of decoders

equipped with transponders

1 BDL162

1 44-Pin Connector

The BDL162 requires a 12V-16V AC or DC power supply which is sold sepa-

rately. Multiple BDL162s can be powered from the same power supply as long

as 100mA is provided for each BDL162. One Digitrax PS12 power supply can

run up to three BDL162s.

Digitrax Manuals and Instructions are updated periodically.

Please visit www.digitrax.com for the latest version of all manuals.

www.digitrax.com

1 LT5 Tester

1 Instruction Manual