Cisco PIX 501 Quick Start Manual - Page 4
Browse online or download pdf Quick Start Manual for Network Hardware Cisco PIX 501. Cisco PIX 501 20 pages. Data sheet
Also for Cisco PIX 501: Quick Start Manual (20 pages), Datasheet (8 pages), Quick Start Manual (21 pages), Quick Start Manual (18 pages)
Print Page
3
Connect the Cables
Computer or other
network device
Top Computer
Follow these steps to connect the cables:
Place the chassis on a flat, stable surface. The chassis is not rack mountable.
Step 1
Connect Port 0, the outside Ethernet port, to the public network:
Step 2
a. Use the yellow Ethernet cable (72-1482-01) to connect the device to a switch or hub.
b. Use the orange Ethernet cable (72-3515-01) to connect the device to a cable/DSL/ISDN
modem.
Connect your PC or other network devices with an Ethernet cable (not provided) to one of
Step 3
the four switched inside ports (numbered 1 through 4).
Note
Make sure that one of the PCs has TCP/IP installed and is configured to obtain an IP
address automatically through DHCP. This allows the PC to communicate with the
PIX 501 and the Internet as well as run the PDM Startup Wizard.
4
Yellow
Ethernet
cable
DSL/Cable/ISDN
Printer
PIX 501
Orange
Ethernet
cable
modem
Power
adapter
Internet