Cisco PIX 501 Quick Start Manual - Page 14

Browse online or download pdf Quick Start Manual for Network Hardware Cisco PIX 501. Cisco PIX 501 18 pages. Data sheet
Also for Cisco PIX 501: Quick Start Manual (20 pages), Datasheet (8 pages), Quick Start Manual (21 pages), Quick Start Manual (20 pages)

Print Page

Active Host Limitation

The Cisco PIX 501 supports up to 10 active hosts on the inside network, or 50 active hosts on the

inside network if the optional 50-User License has been purchased. A host is considered active when

any of the following statements are true:

• The host has passed traffic through the PIX in the last 30 seconds

• The host has an established NAT/PAT translation through the PIX

• The host has an established TCP connection or UDP session through the PIX

• The host has an established user authentication through the PIX

Please see the System Properties>Timeout panel within PDM for the default inactivity timeout values

associated with each of the above bulleted items.

Restore the Default Configuration

If you inadvertently erase the default configuration or need to restore the default configuration, either

use the PDM CLI tool or a terminal emulation program and enter the following command:

You can restore the default configuration only through the CLI.

Note

Command

config factory default [<inside ip

Step 1

address> [address mask]]

write memory

Step 2

Step 3

1. If the optional inside ip address and optional address mask are specified, the factory-default configuration will reflect

the specified IP address.

Note

The config factory default command considers both licensing and platform in

creating DHCP pool sizes of 32, 128, or 256.

Please reference the following URL for detailed command information and configuration examples:

http://cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_61/cmd_ref/index.htm

Description

Erases the running configuration and replaces it with

the factory default configuration.

Writes the factory default configuration to memory.