Cisco S170 Quick Start Manual - Page 12

Browse online or download pdf Quick Start Manual for Network Hardware Cisco S170. Cisco S170 25 pages. Web security appliance
Also for Cisco S170: Installation Instructions Manual (13 pages)

Print Page

Connect to the Appliance

Plug the Ethernet cables into the appropriate ports on the back

panel of the Cisco S170 appliance.

• The proxy ports are labeled P1 and P2.

P1 only enabled: When only P1 is enabled, connect it to

–

the network for both incoming and outgoing traffic.

P1 and P2 enabled: When both P1 and P2 are enabled,

–

you must connect P1 to the internal network and P2 to

the Internet.

• The traffic monitor ports are labeled T1 and T2.

Simplex tap: Ports T1 and T2; one cable for all packets

–

destined for the Internet (T1) and one cable for all

packets coming from the Internet (T2).

Duplex tap: Port T1; one cable for all incoming and

–

outgoing traffic.

Management PC

MGMT

CONSOLE

L4 Switch/

WCCP Router

Ethernet TAP

Simplex/Duplex