Epson 1640XL - Expression Graphic Arts User Manual - Page 3

Browse online or download pdf User Manual for Scanner Epson 1640XL - Expression Graphic Arts. Epson 1640XL - Expression Graphic Arts 22 pages. Color image scanner
Also for Epson 1640XL - Expression Graphic Arts: User Manual (7 pages), Brochure & Specs (24 pages), Product Information (9 pages), Start Here Manual (8 pages), Specifications (2 pages), Product Support Bulletin (23 pages), Manual (11 pages), Update (1 pages), Product Support Bulletin (40 pages), Product Support Bulletin (17 pages), Product Support Bulletin (3 pages), Product Support Bulletin (24 pages), Product Support Bulletin (29 pages), Product Support Bulletin (8 pages), Product Support Bulletin (3 pages), Product Support Bulletin (11 pages), Product Support Bulletin (14 pages), Product Support Bulletin (18 pages), Product Support Bulletin (12 pages), Product Support Bulletin (40 pages), Product Support Bulletin (11 pages), Product Support Bulletin (40 pages), Product Support Bulletin (22 pages), Product Support Bulletin (12 pages), Product Support Bulletin (21 pages), Product Support Bulletin (12 pages), Manual (23 pages)

Print Page
Epson 1640XL - Expression Graphic Arts User Manual

Removing the Shipping Screws

To prevent damage during shipping, two shipping screws are attached to the
transparency unit to secure its lamp assembly. You must remove these screws before
using the transparency unit.
1. Turn the transparency unit so the glass side faces up.
2. Use a Phillips head (cross
head) screwdriver to remove
the shipping screws, as
shown at right.
3. Install the screws in the
storage holes.
If either screw is left in a shipping hole (the outer holes) while using
the transparency unit, the unit may be damaged.
Before transporting the scanner, remove the transparency unit, reinstall the shipping
screws, and turn the transportation lock on the side of the scanner to the
position. See "Transporting the Scanner" on page 55 for instructions.

Installing the Transparency Unit

Follow these steps to install the transparency unit on the scanner.
1. Make sure the scanner is turned off. Then unplug the power cable from the
scanner.
2. Remove the document cover by grasping the back of the document cover and
easing the cover up.
3. Make sure the document table is clean and dust free.
Storage holes
locked