Cisco VIP4-50= Installation And Configuration Manual - Page 9
Browse online or download pdf Installation And Configuration Manual for Network Hardware Cisco VIP4-50=. Cisco VIP4-50= 44 pages. Fourth generation versatile interface processor
Print Page
Table 5
List of Port Adapters Supported by VIP4 (continued)
Product Number
2
PA-SRP-OC12SML
2
PA-SRP-OC12SMX
1. Supported on VIP4-80 only.
2. Requires Cisco IOS release 12.1(12)E or later, or Cisco IOS release 12.1(21)S or later.
Table 6
Product Number
GEIP
GEIP+
All interface processors are dual-width.
Note
Installation Prerequisites
This section provides installation prerequisites to ensure a successful VIP4 installation, and includes the
following sections:
•
•
•
•
•
Software Requirements
The minimum Cisco IOS Release requirements for VIP4-50 and VIP4-80 are listed in
configuration information and support, refer to the modular configuration and modular command
reference publications in the Cisco IOS software configuration documentation set that corresponds to
the software release installed on your Cisco hardware.
You can access Cisco IOS software configuration and hardware installation and maintenance
Note
documentation on the World Wide Web at http://www.cisco.com, http://www-china.cisco.com, or
http://www-europe.cisco.com.
OL-3673-01
Description
Single-mode fiber, long reach
Single-mode fiber, extended reach
List of Interface Processors Supported by VIP4
Description
Gigabit Ethernet Interface Processor
Gigabit Ethernet Interface Processor, enhanced
Software Requirements, page 9
Hardware Requirements, page 10
Microcode Overview, page 10
ROM Monitor Overview, page 11
Tools and Parts Required, page 11
Fourth Generation Versatile Interface Processor (VIP4) Installation and Configuration Guide
Installation Prerequisites
Number of
Ports
Single/Dual Width
2
Dual
2
Dual
Number of Ports
1
1
Table
7. For
9