Epson 2480 - Perfection Photo Product Information Manual - Page 5

Browse online or download pdf Product Information Manual for Scanner Epson 2480 - Perfection Photo. Epson 2480 - Perfection Photo 6 pages. Scanning application force quits on mac os 10.4
Also for Epson 2480 - Perfection Photo: Product Support Bulletin (1 pages), Update Manual (2 pages), Important Safety Instructions (4 pages), Setup Manual (4 pages), Quick Start Manual (8 pages), Product Support Bulletin (23 pages), Manual (11 pages), Update (1 pages), Product Support Bulletin (40 pages), Product Support Bulletin (24 pages), Product Support Bulletin (29 pages), Product Support Bulletin (8 pages), Product Support Bulletin (3 pages), Product Support Bulletin (14 pages), Product Support Bulletin (12 pages), Product Support Bulletin (40 pages), Product Support Bulletin (11 pages), Product Support Bulletin (40 pages), Product Support Bulletin (22 pages), Product Support Bulletin (12 pages), Product Support Bulletin (21 pages)

Print Page

Start Light

The scanner's ] Start light indicates the scanner status.

]

Start light

Scanner status

Flashing green

Warming up or scanning.

Green

Ready to scan.

Flashing red

Make sure the transportation lock is unlocked.

Try restarting your computer and unplugging the

scanner. Wait 10 seconds, then plug the scanner

back in.

Off

Make sure your scanner is connected to your

computer and plugged into a power source.

Before transporting the scanner for a long distance or storing it

for an extended period of time, you need to lock the scanner's

carriage to prevent damage.

1. Plug in the scanner, connect it to your computer, and wait

until the carriage moves to the home position (position

nearest the buttons). While the

unplug the scanner.

2. If the cover cable is attached, disconnect it.

3. To lock the transportation lock, lift the scanner and slide

the lock to the locked position. This secures the carriage.

Caution: Do not turn the scanner over; this may damage it.

4. Attach the protective materials and repack the scanner in its

original box.

Start light is green,

]

Related Documentation