Cisco 2500 Series Configuration Manual - Page 24

Browse online or download pdf Configuration Manual for Server Cisco 2500 Series. Cisco 2500 Series 50 pages. Wireless controller
Also for Cisco 2500 Series: Installing Manual (12 pages), Configuration Manual (19 pages), Deployment Manual (23 pages), Getting Started Manual (47 pages)

Print Page

Spectralink VIEW Certified Configuration Guide: Cisco Controllers and APs

Network settings

Admin Tip: Data Rates

For setting up the Data Rates, please consult your facility's RF site survey,

designed for voice traffic, to determine if you have sufficient coverage to support all

data rates. Spectralink Wireless Telephones require the following minimum dBm

reading to support the corresponding Mandatory data rate setting in the access

point.

802.11

Radio Standard

802.11b

802.11g

802.11a

802.11n

Web Info: RF Deployment reference

For additional details on RF deployment please see the Deploying Enterprise-

Grade Wi-Fi Telephony White Paper.

In the navigation pane under 802.11b/g/n, click Network. Set network parameters as follows:

Set 802.11b/g Network Status to Disable. The radio will be re-enabled after setting radio

parameters.

Use the default Fragmentation Threshold (2346 bytes).

Set the Beacon Period to 100.

Set the 1 Mbps and 2 Mbps settings to Disabled.

Click the Apply button to save the settings.

721-1001-000-AH.docx

December 2016

Minimum Available

Signal Strength (RSSI)

-75 dBm

-65 dBm

-67 dBm

-47 dBm

-67 dBm

-50 dBm

Maximum

"Mandatory" Data Rate

1 Mb/s

11 Mb/s

6 Mb/s

54 Mb/s

6 Mb/s

54 Mb/s

65 Mb/s