Cisco Aironet 3500 Series Getting Started Manual - Page 23
Browse online or download pdf Getting Started Manual for Server Cisco Aironet 3500 Series. Cisco Aironet 3500 Series 31 pages. Aironet 3500 series lightweight access point
Also for Cisco Aironet 3500 Series: Online Help Manual (8 pages), Datasheet (6 pages), Getting Started Manual (35 pages)
Print Page
Saving and Loading Restore Configurations
You can use the restore utility to save a restore configuration to use if you need to restore a Firepower device again.
Although the restore utility automatically saves the last configuration used, you can save multiple configurations,
which include:
network information about the management interface on the appliance; see
Management Interface, page 18
the location of the restore ISO image, as well as the transport protocol and any credentials the appliance needs
to download the file; see
the system software and intrusion rules updates, if any, that you want to apply after the appliance is restored
to the base version in the ISO image; see
page 20
SCP passwords are not saved. If the configuration specifies that the utility must use SCP to transfer ISO and other
files to the appliance, you will have to re-authenticate to the server to complete the restore process.
The best time to save a restore configuration is after you provide the information listed above, but before you
download and mount the ISO image.
To save a restore configuration:
1.
From the restore utility main menu, select
The utility displays the settings in the configuration you are saving.
2.
When prompted, confirm that you want to save the configuration.
3.
When prompted, enter a name for the configuration.
What to Do Next
To use the configuration you just saved to restore the appliance, continue with
Update Files and Mounting the Image, page
To load a saved restore configuration:
1.
From the restore utility main menu, select
The utility presents a list of saved restore configurations. The first option,
last used to restore the appliance. The other options are restore configurations that you have saved.
2.
Select the configuration you want to use.
The utility displays the settings in the configuration you are loading.
3.
When prompted, confirm that you want to load the configuration.
The configuration is loaded. If prompted, confirm the IP address assigned to the appliance's management
interface.
What to Do Next
To use the configuration you just loaded to restore the appliance, continue with
Update Files and Mounting the Image, page
Next Steps
Restoring your appliance to factory default settings results in the loss of almost all configuration and event data
on the appliance, including bypass configurations for devices deployed inline. For more information, see
Flow During the Restore Process, page
Cisco Firepower Management Center Getting Started Guide
Restoring a Firepower Management Center to Factory Defaults
Specifying ISO Image Location and Transport Method, page 19
Updating System Software and Intrusion Rules During Restore,
6 Save Configuration
20.
7 Load Configuration
20.
13.
Identifying the Appliance's
.
Downloading the ISO and
.
default_config
Downloading the ISO and
, is the configuration you
Traffic
23