Cisco AS5300 - Universal Access Server Appendix - Page 3
Browse online or download pdf Appendix for Server Cisco AS5300 - Universal Access Server. Cisco AS5300 - Universal Access Server 10 pages. Access server
Also for Cisco AS5300 - Universal Access Server: Quick Start Manual (25 pages), Configuration Manual (46 pages), Manual (21 pages)
Print Page
Use the RJ-45-to-RJ-45 rollover cable and RJ-45-to-DB-25 female DTE adapter (labeled
TERMINAL) to connect the console port to a terminal. Figure D-3 shows how to connect the console
port to a terminal. Table D-1 lists the pinouts for the asynchronous serial console port, the
RJ-45-to-RJ-45 rollover cable, and the RJ-45-to-DB-25 female DTE adapter (labeled TERMINAL).
Figure D-3
Access
server
Table D-2
Console
Port (DTE)
Signal
RTS
DTR
TxD
GND
GND
RxD
DSR
CTS
1
2
Auxiliary Port Signals and Pinouts
Use the RJ-45-to-RJ-45 rollover cable and RJ-45-to-DB-25 male DCE adapter (labeled MODEM)
to connect the auxiliary port to a modem. Figure D-4 shows how to connect the auxiliary port to a
modem. Table D-4 lists the pinouts for the asynchronous serial auxiliary port, the RJ-45-to-RJ-45
rollover cable, and the RJ-45-to-DB-25 male DCE adapter (labeled MODEM).
Figure D-4
Access
server
Connecting the Console Port to a Terminal
RJ-45 to RJ-45
rollover cable
Console Port Signaling and Cabling Using a DB-25 Adapter
RJ-45-to-RJ-45 Rollover
1
Cable
RJ-45 Pin
2
1
2
3
4
5
6
7
1
8
You can use the same cabling to connect a console to the auxiliary port.
Pin 1 is connected internally to pin 8.
Connecting the Auxiliary Port to a Modem
RJ-45 to RJ-45
rollover cable
RJ-45 to DB-25 adapter
(labeled TERMINAL)
RJ-45-to-DB-25
Terminal
Adapter
RJ-45 Pin
DB-25 Pin
8
5
7
6
6
3
5
7
4
7
3
2
2
20
1
4
RJ-45 to DB-25 adapter
(labeled MODEM)
Auxiliary Port Signals and Pinouts
Terminal
Console
Device
Signal
CTS
DSR
RxD
GND
GND
TxD
DTR
RTS
Modem
Cabling Specifications D-3