Cisco IE-3000-8TC Getting Started Manual - Page 24

Browse online or download pdf Getting Started Manual for Server Cisco IE-3000-8TC. Cisco IE-3000-8TC 32 pages. Getting started guide

Print Page

Connecting to Dual-Purpose Ports

Step 1

Insert either an RJ-45 connector to the 10/100/1000 port (see the

10/100/1000 Ports" section on page

and connect a cable to the SFP module port. (See the

to Ports" section on page

Step 2

Insert the other cable end into the other device.

Step 1

Insert an LC cable into the 100BASE-FX port

of a Cisco IEM-3000-8FM expansion module.

Step 2

Insert the other cable end into the other device.

Cisco IE 3000 Switch Getting Started Guide

Only one port on a dual-purpose port can be active at a time. If both ports are

connected, the SFP module port has priority.

Follow these steps:

23.)

Follow these steps:

After you connect to the switch port and another device, the port LED turns amber

while the switch establishes a link. This process takes about 30 seconds, and then

the LED turns green when the switch and the target device have an established

link. If the LED is off, the target device might not be turned on, there might be a

cable problem, or there might be a problem with the adapter installed in the

target device.

22), or install an SFP module into the SFP module slot,

"Installing SFP Modules and Connecting

Cisco IE 3000 Switch Getting Started Guide

"Connecting to 10/100 and

OL-16234-01