2. Windows: If you see the Software Installation screen,
click Exit. Open the SecurityLockTool folder on your
CD-ROM, then double-click the EPILOCE4 icon.
Macintosh: The Epson folder automatically opens (if it
doesn't, double-click the Epson CD-ROM icon). Then
double-click the Security Lock icon.
3. When you see the Epson Security Lock screen, select
Security Lock Off and click OK.
4. At the confirmation screen, click OK again and close the
program. This deactivates the security lock feature so that
the Security Lock menu no longer appears on the CX6600
LCD screen. You now have full access to the CX6600.
Loading Paper
Single Sheets
1. Pull out the output tray and its extension.
2. Flip the feeder guard forward.
3. Insert your paper against the right edge of the sheet feeder.
4. Slide the left edge guide against the paper (but not too
tightly).
Note:
Do not place paper in front of the feeder guard.
Slide the guide
against the
paper, but not
too tightly
Be sure to:
❏ Load the printable side face-up. It's often whiter or brighter
than the other side.
❏ Load letterhead or preprinted paper top edge first.
❏ Load paper short-edge first, even for landscape-oriented
documents and photos.
❏ Don't load paper above the arrow on the left edge guide, up
to approximately 125 sheets of plain paper.
❏ If the paper has a cut corner, position it in the upper right
corner as you load it in the sheet feeder.
Insert paper against
the right edge
Feeder guard
Extend the
output tray
Selecting the Correct Paper Type
Select the Type (Windows) or Media Type (Macintosh)
setting in your printer software according to these guidelines:
For this paper
Plain paper sheets or envelopes
Epson Premium Bright White Paper
Epson Matte Paper Heavyweight
Epson Double-Sided Matte Paper
PremierArt Matte Scrapbook Photo Paper
for Epson
Epson DURABrite Ink Glossy Photo Paper DURABrite Ink Glossy Photo
Epson Photo Paper
Epson Glossy Photo Paper
Epson All-Purpose Glossy Photo Paper
Epson Glossy Photo Greeting Cards
Epson Premium Semigloss Photo Paper
Epson Ink Jet Transparencies
Placing Your Original Document
1. Open the scanner lid.
2. Place your document face-down on the glass, in the upper
left corner, about 1/8 inch from the top and side edge.
Move the document
about 1/8 inch from the
edges to avoid cropping
3. Close the scanner lid.
Note:
If you place your document against the guides, the edges next to the
guides won't be scanned.
If you need to scan a thick document, such as a book, you can
remove the scanner lid. Open the scanner lid completely, then lift it
out. Gently press down the original to keep it flat on the document
table. Be sure to replace the scanner lid when you're finished.
6/04
Epson Stylus CX6600
Select this Type or Media
Type setting
Plain Paper/ Bright White
Paper
Matte Paper - Heavyweight
Paper
Glossy Photo Paper
Ink Jet Transparency
Epson Stylus CX6600
- 5
Print Page