Cisco NCS 1001 Configuration Manual - Page 15

Browse online or download pdf Configuration Manual for Server Cisco NCS 1001. Cisco NCS 1001 36 pages. Data models configuration guide
Also for Cisco NCS 1001: Manual (8 pages), Start Manual (40 pages)

Print Page

Using Data models

Before You Begin

• Install the required packages (k9sec and mgbl)

• Generate relevant crypto keys

Step 1

netconf-yang agent ssh

Enables the Netconf agent process.

Step 2

ssh server netconf

Enables Netconf.

Step 3

ssh server v2

Enables SSH on the device and enables Netconf on port 22 if the Netconf agent process is enabled.

What to Do Next

The netconf-yang agent session command enables the user to set session parameters.

netconf-yang agent session {limit value |

where,

• limit value- sets the maximum count for concurrent netconf-yang sessions. Range is 1 to 1024. The

• absolute-timeout value- sets the absolute session lifetime. Range is 1 to 1440 (in minutes).

• idle-timeout value- sets the idle session lifetime. Range is 1 to 1440 (in minutes).

Enabling gRPC

Use the following procedure to enable gRPC over HTTPS/2. gRPC supports both, the IPv4 and IPv6 address

families (default is IPv4).

Step 1

Install the GO client. For more details on installing the GO client, see https://golang.org/doc/install.

Step 2

Configure the gRPC port, using the grpc port command.

RP/0/RP0/CPU0:ios(config)#grpc

RP/0/RP0/CPU0:ios(config)#port 57400

RP/0/RP0/CPU0:ios(config)#tls

RP/0/RP0/CPU0:ios(config)#commit

Port can range from 57344 to 57999. If a port is unavailable, an error is displayed.

default value is 50.

absolute-timeout value |

Data Models Configuration Guide for Cisco NCS 1001

Enabling gRPC

idle-timeout value}