Cisco Nexus 7000 Series Installation Manual - Page 8

Browse online or download pdf Installation Manual for Server Cisco Nexus 7000 Series. Cisco Nexus 7000 Series 18 pages. Switch chassis
Also for Cisco Nexus 7000 Series: Reference Manual (2 pages), Installation Instructions Manual (39 pages), Reference (34 pages), Configuring (8 pages), Configuration Manual (28 pages), Quick Start Manual (10 pages), Quick Start Manual (29 pages), Replacement Instructions Manual (14 pages), Replacement Instructions Manual (21 pages), Installing Manual (16 pages), Troubleshooting Manual (10 pages)

Print Page

Access and Configure Hypervisor

Procedure

Step 1

Launch the vSphere client application and type the IP address of the Hypervisor.

Figure 8: Access Hypervisor Using vSphere Client

Step 2

Use the login credentials that you previously configured.

Step 3

(Optional) If you order BE7000 with factory-preloaded embedded license, then the BE7000 Cisco UC

Virtualization Foundation license is predeployed and is therefore ready for use on delivery. If you need to

reapply the license, follow these steps:

a) Note the Master Serial Number that is shipped with the server. The Master Serial Number is the license

activation key.

Note

b) Navigate to Configuration > Software > Licensed Features, and click Edit.

c) Select Assign a new license key to this host.

d) Click Enter Key....

e) Type in the Master serial number.

f) Click OK to close configuration dialogs and apply the license.

Cisco Business Edition 7000 Installation Guide, Release 11.6

The Master Serial Number is pre-activated. You do not need to register it at

www.VMware.com.

This serial number is hardcoded for a two-CPU system. You cannot combine it, or register it,

with other licenses at http://www.VMware.com. You cannot change the serial number to

single-CPU or greater than two-CPU.

Installation

http://