Cisco S695F Getting Started Manual - Page 7

Browse online or download pdf Getting Started Manual for Server Cisco S695F. Cisco S695F 18 pages. Web security appliance
Also for Cisco S695F: Manual (24 pages), Hardware Installation Manual (50 pages)

Print Page

Click Local Area Connection and then click Properties.

Step 4

Choose Internet Protocol (TCP/IP) and then click Properties.

Step 5

Choose Use the Following IP Address.

Step 6

Enter the following changes:

Step 7

Click OK and Close to exit the dialog box.

Step 8

Temporarily Change Your IP Address on Mac

Note

The exact steps depend on the version of your operating system.

Procedure

Launch the Apple menu and choose System Preferences.

Step 1

Click Network.

Step 2

Click lock icon to allow changes.

Step 3

Select the Ethernet network configuration with the green icon. This is your active connection. Then click

Step 4

Advanced.

Click the TCP/IP tab and from Ethernet settings, choose Manually from the drop-down list.

Step 5

Enter the following changes:

Step 6

Click OK.

Step 7

Connect to the Appliance

After rack-mounting the appliance, follow these steps to connect cables, turn on power, and verify

connectivity.

•

IP Address: 192.168.42.43

–

Subnet Mask: 255.255.255.0

–

Default Gateway: 192.168.42.1

–

IP Address: 192.168.42.43

–

Subnet Mask: 255.255.255.0

–

Router: 192.168.42.1

–

Cisco S195 Appliance, page 8

Cisco S395 Appliance, page 9

Cisco S695 Appliance, page 10

Cisco S695F Appliance, page 12

Cisco Web Security Appliance S195, S395, S695, and S695F Getting Started Guide

Connect to the Appliance