Cisco SNS-3495 series Installing Manual - Page 10
Browse online or download pdf Installing Manual for Server Cisco SNS-3495 series. Cisco SNS-3495 series 19 pages. Sns-3400 series
Also for Cisco SNS-3495 series: Installation Manual (36 pages), Troubleshooting Manual (8 pages)
Print Page
Connecting Cables
To connect a PC running terminal-emulation software to the console port, use a DB-9 female to DB-9
female straight-through cable.
To connect an ASCII terminal to the console port, use a DB-9 female to DB-25 male straight-through
cable with a DB-25 female to DB-25 female gender changer.
To connect a terminal or a PC running terminal-emulation software to the console port on the Cisco
SNS-3415 or Cisco SNS-3495 appliance:
Connect the terminal using a straight-through cable to the console port.
Step 1
Configure your terminal or terminal-emulation software for 9600 baud, 8 data bits, no parity, 1 stop bit,
Step 2
and no hardware flow control.
Connecting the Keyboard and Video Monitor
Do not work on the system or connect or disconnect cables during periods of lightning activity.
Warning
Statement 1001
This section describes how to connect a keyboard and video monitor to the Cisco SNS-3415 or Cisco
SNS-3495 appliance.
You can connect the keyboard and video monitor to the Cisco SNS-3415 or Cisco SNS-3495 appliance
using the KVM connector available in the front panel of the Cisco SNS-3415 or Cisco SNS-3495
appliance. A KVM cable is shipped along with the appliance that provides two USB, one VGA, and one
serial connector.
The Cisco SNS-3415 or Cisco SNS-3495 appliance does not provide support for a mouse.
The Cisco SNS-3415 or Cisco SNS-3495 provides USB ports on the rear of the appliance that can be
used to connect a keyboard and video monitor.
To connect a keyboard and video monitor to the appliance:
Verify that the appliance is turned off.
Step 1
Connect the end of the keyboard cable to the PS/2 (keyboard) port which is located on the back panel of
Step 2
the appliance.
Connect the end of the video monitor cable to the PS/2 (video monitor) port which is located on the back
Step 3
panel of the appliance.
Power on the appliance.
Step 4
Cable Management
Cable management is the most visual aspect of your appliance setup. However, cable management is
often overlooked because it can be time consuming.
Installation and Upgrade Guide for Cisco Secure Access Control System 5.6
8-10
Chapter 8
Installing the Cisco SNS 3415 and Cisco SNS 3495 Hardware Appliances