Cisco SNS-3595-K9 Software Installation - Page 4

Browse online or download pdf Software Installation for Server Cisco SNS-3595-K9. Cisco SNS-3595-K9 38 pages.
Also for Cisco SNS-3595-K9: Installation Manual (36 pages)

Print Page

Cisco SNS-3515 or 3595 Appliance Front Panel View

Front Panel LEDs

Hard drive activity

Power button/LED

Unit identification

System status

Fan status

Install Cisco ISE Software on Cisco SNS Appliances

• Off—There is no hard drive in the hard drive

tray (no access, no fault).

• Green—The hard drive is ready.

• Green, blinking—The hard drive is reading or

writing data.

• Off—There is no AC power to the server.

• Amber—The server is in standby power mode.

Power is supplied only to the Cisco IMC and

some motherboard functions.

• Green—The server is in main power mode.

Power is supplied to all server components.

• Off—The unit identification function is not in

use.

• Blue—The unit identification function is

activated.

• Green—The server is running in normal

operating condition.

• Green, blinking—The server is performing

system initialization and memory check.

• Amber, steady—The server is in a degraded

operational state. For example:

• Power supply redundancy is lost.

• CPUs are mismatched.

• At least one CPU is faulty.

• At least one DIMM is faulty.

• At least one drive in a RAID configuration

failed.

• Amber, blinking—The server is in a critical fault

state. For example:

• Boot failed.

• Fatal CPU and/or bus error is detected.

• Server is in an over-temperature condition.

• Green—All fan modules are operating properly.

• Amber, steady—One or more fan modules

breached the critical threshold.

• Amber, blinking—One or more fan modules

breached the non-recoverable threshold.