CUCM Integration with Content Server 6.2
Step 5
Click Add to Route Group.
Step 6
Under Current Route Group Members, confirm that the SIP trunk that connects to the subscriber TCS
6.2 appears first in the list. You can select the up or down arrows to change the order of the SIP trunks.
Step 7
Click Save.
Create a Route List (for a TCS Cluster)
Step 1
On the Call Routing menu, click Route/Hunt > Route List.
Step 2
On the Find and List Route Lists page, click Add New.
Step 3
On the Route List Configuration page, enter the following settings.
Field
Name
Description
Cisco Unified
Communications
Manager Group
Step 4
Click Save.
Step 5
Confirm that the Enable This Route List check box is checked.
Step 6
Under Route List Member Information, click Add Route Group.
Step 7
On the Route List Detail Configuration page, in the Route Group field, select the Route Group that you
created in the
Step 8
When prompted that the route list settings will be saved, click OK.
Step 9
On the Route List Configuration page, click Reset.
Step 10
When prompted to confirm resetting the route list, click Reset.
Step 11
Click Close.
Create a Route Pattern (for a TCS Cluster)
Step 1
On the Call Routing menu, click Route/Hunt > Route Pattern.
Step 2
On the Find and List Route Patterns page, click Add New.
Step 3
On the Route Pattern Configuration page, enter the following settings.
Step 4
Click Save and then click Close.
Cisco TelePresence Content Server Release 6.2.1 Administration and User Guide
3-34
Chapter 3
Configuring a Cisco Unified Communications Manager SIP Trunk with a Cisco TelePresence
Setting
Enter SIP_Trunk_Route_List or another name.
Enter SIP Trunk Route List or another description.
Click Default.
Create a Route Group (for a TCS Cluster)
and click Save.
Print Page