Cisco UCS User Manual - Page 41

Browse online or download pdf User Manual for Server Cisco UCS. Cisco UCS 50 pages. C-series

Print Page

Configuring RAID Levels

You can use the RAID Configuration functionality to configure the on-board or PCIe supported RAID

controller cards.

If your system has multiple RAID controllers, UCS-SCU displays a list of all available RAID cards, and

physical and logical disks on the RAID Configuration page.

The following RAID configuration options are available:

•

This section includes the following sections:

•

This section describes the RAID Configuration page and contains the following topics:

•

The Physical Disks table in the RAID Configuration page lists the following:

•

Automatic setup with redundancy

Automatic setup without redundancy

Single RAID levels—RAID 0, RAID 1, RAID 5 and RAID 6

Nested RAID levels—RAID 10, RAID 50 and RAID 60

RAID Configuration Page Components, page 7-1

Configuring RAID Arrays, page 7-3

Clearing RAID Arrays, page 7-6

Physical Disks Table, page 7-1

Logical Disks Table, page 7-2

ID—The identifying number of the physical disk.

Slot—The slot in which the physical disk belongs.

State—The status of the disk. For more information about the various disk states, go to

Size—The size of the physical disk.

Device Speed—The disk access speed of the controller.

C H A P T E R

Cisco UCS Server Configuration Utility, Release 5.0

Table

7-1.

7-1