Cisco UCS B22 M3 Upgrade Manual - Page 11

Browse online or download pdf Upgrade Manual for Server Cisco UCS B22 M3. Cisco UCS B22 M3 21 pages. Blade server
Also for Cisco UCS B22 M3: Installation And Service Note (31 pages)

Print Page
Cisco UCS B22 M3 Upgrade Manual
Do not continue with the next step until the board controller activation completes. Verify whether the
Step 10
activation is complete by using the show version command.
As shown in the example below, wait until the Activate-Status returns Ready. This process takes a few
minutes before the Activate-status is successfully completed and returns Ready.
# show version
BoardController:
Step 11
Clear the WILL_BOOT_FAULT
a.
b.
c.
d.
e.

Upgrade Scenario 2: UCSM and BIOS at Version 2.2(2c) or Later, CPU Earlier Than Intel E5-2400 v2

This scenario assumes the following conditions:
•
•
•
In this case, the server already has the software and firmware prerequisites. Use the following procedure
to upgrade the CPUs:
Disassociate the server in Cisco UCS Manager.
Step 1
Power off the server.
Step 2
Step 3
Replace the CPUs with the Intel E5-2400 v2 Series CPUs.
Use the procedures in the
Step 4
Reinsert the server to the chassis.
Wait for Cisco UCS Manager to automatically discover the server.
Step 5
OL-28629-02
Running-Vers: 8.0
Package-Vers:
Activate-Status: Ready
In the Navigation pane, click the Equipment tab.
On the Equipment tab, expand Equipment > Chassis > Chassis number > Servers, then choose
your server.
In the Work pane, click the General tab.
In the Actions area, click Recover Server.
In the Recover Server dialog, click Reset CIMC (Server Controller), then click OK.
Wait for CIMC to reboot and for Cisco UCS Manager to do a shallow discovery of the server. This
takes two to three minutes. At the end of this process the WILL_BOOT_FAULT is cleared.
The Cisco UCS Manager software is at version 2.2(2c) or later.
The server is already using BIOS/CIMC version 2.2(2c) or later.
The server is using CPUs earlier than Intel E5-2400 v2 Series CPUs.
Blade Server Installation and Service Note
Cisco UCS B-Series Servers Upgrade Guide for Intel E5-2600/E5 2400 v2 Series CPUs
using the Cisco UCS Manager GUI to reset the server CIMC:
by
Cisco UCS Blade Server
for your server.
11