Cisco UCS B22 M3 Installation And Service Note - Page 6
Browse online or download pdf Installation And Service Note for Server Cisco UCS B22 M3. Cisco UCS B22 M3 31 pages. Blade server
Also for Cisco UCS B22 M3: Upgrade Manual (21 pages)
Print Page
Step 2
Place the hard drive on an antistatic mat or antistatic foam if you are not immediately reinstalling it in another server.
Step 3
Install a hard disk drive blank faceplate to keep dust out of the blade server if the slot will remain empty.
Installing a Blade Server Hard Drive
To install a hard drive in a blade server, follow these steps:
Procedure
Step 1
Place the hard drive lever into the open position by pushing the release button.
Figure 4: Installing a Hard Drive in a Blade Server
Step 2
Gently slide the hard drive into the opening in the blade server until it seats into place.
Step 3
Push the hard drive lever into the closed position.
You can use Cisco UCS Manager to format and configure RAID services. For details, see the Configuration Guide for the
version of Cisco UCS Manager that you are using. The configuration guides are available at the following URL:
www.cisco.com/en/US/products/ps10281/products_installation_and_configuration_guides_list.html
If you need to move a RAID cluster, see the
Blade Server Removal and Installation
Before performing any internal operations on this blade server, you must remove it from the chassis.
6
Cisco UCS Manager B-Series Troubleshooting
http://
Guide.