Cisco UCS B460 M4 Installation And Service Note - Page 29

Browse online or download pdf Installation And Service Note for Server Cisco UCS B460 M4. Cisco UCS B460 M4 50 pages. Blade server
Also for Cisco UCS B460 M4: Datasheet (7 pages), Installation And Service Note (46 pages), Quick Start Manual (2 pages), Quick Start Manual (5 pages)

Print Page

Servicing the Blade Server

Loosen one screw by a quarter turn, then move to the next screw. Continue loosening until the heat sink can

be lifted off.

Step 2

Remove the heat sink.

Remove the existing thermal compound from the bottom of the heat sink using the cleaning kit included with

each CPU option kit. Follow the instructions on the two bottles of cleaning solvent.

Step 3

Unhook the first socket hook, which has the following icon:

Step 4

Unhook the second socket hook, which has the following icon: See callout 4 in the following figure.

Step 5

Open the socket latch.

Figure 11: Removing the Heat Sink and Accessing the CPU Socket

Step 6

Press the central button on the provided CPU pick and place tool (UCS-CPU-EP-PNP=) to release the catch.

The CPU pick and place tool is included with each CPU option kit, or the tool may be purchased separately.

Step 7

Remove an old CPU as follows:

a) Place the CPU pick and place tool on the CPU socket aligned with the arrow pointing to the CPU

registration mark.

b) Press the button/handle on the tool to grasp the installed CPU.

c) Lift the tool and CPU straight up.

Cisco UCS B260 M4 and B460 M4 Blade Server Installation and Service Note for Servers with E7 v3 and E7 v2 CPUs

Removing a CPU and Heat Sink

See callout 3 in the following figure.