Cisco UCS C480 M5 Manual - Page 33

Browse online or download pdf Manual for Server Cisco UCS C480 M5. Cisco UCS C480 M5 34 pages.

Print Page

Installing a DIMM or DIMM Blank

To install a DIMM or a DIMM blank into a slot on the blade server, follow these steps.

Procedure

Step 1 Open both DIMM connector latches.

Step 2 Press evenly on both ends of the DIMM until it clicks into place in its slot

Note: Ensure that the notch in the DIMM aligns with the slot. If the notch is misalignment is

possible damage the DIMM, the slot, or both.

Step 3 Press the DIMM connector latches inward slightly to seat them fully.

Step 4 Populate all slots with a DIMM or DIMM blank. A slot cannot be empty.

Figure 4

Installing Memory

Cisco UCS C480 M5 Memory Guide

Installing a DIMM or DIMM Blank