Epson Expression 636 Easy Setup Manual - Page 10

Browse online or download pdf Easy Setup Manual for Scanner Epson Expression 636. Epson Expression 636 21 pages. Product support bulletin(s)
Also for Epson Expression 636: Setup Manual (36 pages), Product Information Manual (5 pages), Software Manual (4 pages), Manual (11 pages), Product Support Bulletin (14 pages), Product Support Bulletin (5 pages)

Print Page
Epson Expression 636 Easy Setup Manual
Note for Windows 95 SCSI users:
After you connect your scanner to your computer, you see the screen
below when you install or start Windows 95, or when you select the
Add New Hardware in the Control Panel.
Choose Do not install a driver and click OK. You do not need to
install EZ-SCSI, even if you are using an Adaptec SCSI card.
If you do not see this screen, make sure your SCSI adapter is set up
correctly. See your SCSI adapter documentation.
2. Insert the EPSON Scan! II program diskette 1 in a diskette
drive.
3. From Windows 95, click Start and then Run.
From the Windows 3.1 Program Manager, open the File
menu and select Run.
4. Type A:\SETUP (or B:\SETUP if you inserted the diskette in
drive B) and click OK. After a few moments, you see the
initial setup screen.
5. Click OK to continue. A dialog box displays the path in
which the installer software will install the EPSON Scan! II
program. The default path is C:\EPSCAN32 for Windows 95
or C:\EPSCAN2 for Windows 3.1.
8 Installing the EPSON Scanning Utilities