Epson GT-15000 Series Setup Manual - Page 35

Print Page

Understanding IEEE 1394 connections

The Scanner I/F Card is equipped with two cable connectors. One

is used to connect the card to the computer, and the other is used

to connect other IEEE 1394 devices in a daisy chain or tree

configuration. Use the cable supplied when making the

connection. The cable can be connected without switching off the

power supply to the computer or the scanner because it complies

with the IEEE 1394 standard. Cables can be connected whether

the scanner or computer are on or off.

Caution:

Do not connect or disconnect IEEE 1394 cables when the scanner

is in use.

Connecting to your computer

To connect the scanner to your computer or other IEEE 1394

device:

Note:

You need to install the scanner software before you connect your scanner

to your computer.

1. Connect one end of the cable to the IEEE 1394 port of the

Scanner I/F Card on back of the scanner.

Options