B3 innovations Pico Manual - Page 4
Browse online or download pdf Manual for 3D Printers B3 innovations Pico. B3 innovations Pico 12 pages.
Print Page
Fan Position | Specs | Shroud
Recommended fan size is 40mm with a range of 5 CFM
to 8 CFM. (You may need to limit fan speed with 6 CFM
fan or more to prevent over-cooling).
Position the fan 30-50mm away from Pico. It is best to
use a non-restrictive shroud/deflector to direct air flow
only at the cooling fins and not the melt zone.
More fan shrouds can be found at thingiverse.com
PLA: Fan required ABS/Nylon: Fan recommended PC: Fan not required
30-50mm
Deflector
Setting Z-Height
Using a sheet of normal paper as a gauge, slide it
between the nozzle and the print bed in order to find
the optimal Z-height. (The nozzle should just start to
grab the paper when sliding it back and forth).
2
Pico User Guide