Epson GT-2500 Series Product Information - Page 3

Browse online or download pdf Product Information for Scanner Epson GT-2500 Series. Epson GT-2500 Series 11 pages. Product support bulletin(s)
Also for Epson GT-2500 Series: Specifications (2 pages), Specification (4 pages), Start Here (4 pages), Notices And Warranty (29 pages), Setup Manual (4 pages), Product Support Bulletin (23 pages), Product Support Bulletin (40 pages), Product Support Bulletin (24 pages), Product Support Bulletin (29 pages), Product Support Bulletin (8 pages), Product Support Bulletin (3 pages), Product Support Bulletin (11 pages), Product Support Bulletin (14 pages), Product Support Bulletin (12 pages), Product Support Bulletin (40 pages), Product Support Bulletin (11 pages), Product Support Bulletin (40 pages), Product Support Bulletin (22 pages), Product Support Bulletin (21 pages), Product Support Bulletin (12 pages), Start Here (2 pages)

Print Page
Epson GT-2500 Series Product Information
Loading Documents in the Automatic
Document Feeder
You can load up to 50 sheets of paper in the ADF (a stack
thickness of 0.2 inches [5.0 mm] or less). See "Document
Specifications" to the right for details.
Only load sheets that are all the same size.
Caution:
Do not feed photographs or valuable original artwork into the ADF.
Misfeeding may wrinkle or damage the original. Scan high-quality
color or halftone documents on the document table instead.
Remove any documents from the document table and make sure
there is no dust on the glass before loading documents in the ADF.
1. Extend the paper support at the end of the output tray on
the ADF.
2. Slide the edge guides on the input tray of the ADF all the
way outward.
3. Place your document in the input tray with the printed side
facing up and the top edge facing into the feeder. Slide the
paper into the feeder until it meets resistance.
Then slide the edge guides over to the edge of the paper.

Document Specifications

The table below listed the sizes of paper you can load in the
ADF.
Paper name
Letter
A4
Legal
B5
A5
Load only documents that meet the following specifications in
the ADF:
Size
Width: 5.9 to 8.5 inches (148.5 to 215.9 mm)
Length: 5.9 to 14 inches (148.5 to 355.6 mm)
Weight
60 to 105 g/m
Paper type
High-quality bond paper
Make sure your documents meet the following conditions
before loading them into the ADF:
❏ The ink is dry.
❏ The document has no holes and is not ripped or wrinkled.
❏ The document has no staples, paper clips, or other objects
attached to it; these may damage the feeder mechanism.
❏ The document has no folds.
❏ The document has no cut-out areas.
❏ The document is not a multipart form or bound.
❏ The document has no rear carbon coating.
7/06
Epson GT-2500 and GT-2500 Plus - 3
Epson GT-2500 and GT-2500 Plus
Size
8.5 × 11 inches (215.9 × 279.4 mm)
8.3 × 11.7 inches (210 × 297 mm)
8.5 × 14 inches (215.9 × 355.6 mm)
7.2 × 10.1 inches (182 × 257 mm)
5.9 × 8.3 inches (148.5 × 210 mm)
2