Cisco 2600 Series Manual - Page 4

Browse online or download pdf Manual for Gateway Cisco 2600 Series. Cisco 2600 Series 5 pages. Configuring adsl wic to support pppoe clients
Also for Cisco 2600 Series: Installation Manual (12 pages), Release Notes (32 pages), Configuration (15 pages), Application Note (41 pages), Datasheet (6 pages), Appendix (15 pages), Installation Manual (22 pages), Overview (13 pages), Quick Start Manual (2 pages)

Print Page
Cisco 2600 Series Manual
!
redundancy
main−cpu
auto−sync standard
no secondary console enable
ip subnet−zero
ip cef
!
vpdn enable
!
vpdn−group 1
accept−dialin
protocol pppoe
virtual−template 1
pppoe limit per−mac 101
pppoe limit per−vc 102
!
interface ATM0/0/0
no ip address
no ip directed−broadcast
no ip mroute−cache
no atm ilmi−keepalive
!
interface ATM0/0/0.1 multipoint
no ip directed−broadcast
pvc 3/100
encapsulation aal5snap
protocol pppoe
!
interface Ethernet0/0/1
ip address 10.0.0.1
255.0.0.0
no ip directed−broadcast
!
interface Ethernet0/0/0
no ip address
no ip directed−broadcast
shutdown
!
interface FastEthernet0/0/0
no ip address
no ip directed−broadcast
half−duplex
!
interface Virtual−Template1
!−−− Do not use a static IP assignment within
!−−− a virtual template; routing problems can occur.
ip mtu 1492
ip unnumbered Ethernet0/0/1
!−−− Always use the ip unnumbered command
!−−− when configuring a virtual template.
no ip directed−broadcast
ip mroute−cache
peer default ip address pool pool name
ppp authentication chap
!
ip local pool pool name 10.0.0.2 10.0.0.12
ip classless