Cisco 3600 Series Configuration Note - Page 15

Browse online or download pdf Configuration Note for Gateway Cisco 3600 Series. Cisco 3600 Series 23 pages. Memory upgrade
Also for Cisco 3600 Series: Product Overview (10 pages), Upgrade Instructions (30 pages), Owner's Manual (17 pages), Application Note (41 pages), Configuration Manual (36 pages), User Manual (25 pages), Appendix (15 pages), User Manual (7 pages), Manual (5 pages), Configuration Note (18 pages), Configuration Note (25 pages)

Print Page

Figure 15

Installing the Power Supply

Follow these steps to install a power supply in the chassis:

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Figure 16

Removing the Cisco 3640 Power Supply

Power supply

Place the power supply in the chassis, with the power supply faceplate slightly separated

from the chassis rear panel. This position allows the hooks in the chassis to engage the

cutouts in the bottom of the power supply. (See Figure 16 and Figure 17.)

Slide the power supply toward the rear of the chassis, engaging the hooks in the chassis.

Replace the external rear mounting screws. (See Figure 12 and Figure 13.)

Insert the large power connector into the receptacle on the motherboard. (See Figure 10

and Figure 11.)

Join the small connectors used to power the fans. Either connector can go to either fan.

(See Figure 8 and Figure 9.)

Using tie-wraps, fasten the power cables into a bundle that clears the edge of the chassis

and keeps the cables away from the fan. Be sure that cables to the fans are routed under

the hook in the bottom of the chassis. (See Figure 8 and Figure 9.)

Installing the Cisco 3620 Power Supply

Rear of chassis

Front of chassis

Hooks

Slots

Power supply

Cisco 3600 Series Power Supply Configuration Note

Installing the Power Supply