Cisco 3600 Series Configuration Note - Page 6

Browse online or download pdf Configuration Note for Gateway Cisco 3600 Series. Cisco 3600 Series 23 pages. Memory upgrade
Also for Cisco 3600 Series: Product Overview (10 pages), Upgrade Instructions (30 pages), Owner's Manual (17 pages), Application Note (41 pages), Configuration Manual (36 pages), User Manual (25 pages), Appendix (15 pages), User Manual (7 pages), Manual (5 pages), Configuration Note (18 pages), Configuration Note (25 pages)

Print Page
Cisco 3600 Series Configuration Note

Tools and Equipment Required

Figure 4
3
2E
W1
2W
1
Table 1
Specification
Input voltage
Frequency
Current rating
Power dissipation
Table 2
Specification
Input voltage
Current rating
Power dissipation
Wire gauge for DC-input
power connections
1. AWG = American Wire Gauge.
Tools and Equipment Required
You need the following tools and equipment to remove and install power supplies in a Cisco 3600
series router:
•
•
•
6 Cisco 3600 Series Power Supply Configuration Note
Rear View of Cisco 3640 Router
Slot 3
B1
BRI
B2
NT1
SEE MANUAL BEFORE INSTALLATION
ETHERNET 1
ETHERNET 0
Slot 1
AC Power Supply Specifications
Value
100 to 240 VAC, autoranging
50 to 60 Hz
3.0A maximum at 100 VAC, 1.5A maximum at 240 VAC
140 W maximum
DC Power Supply Specifications
Value
38 to 72 VDC
5.0A maximum at 38 VDC, 2.8A maximum at 72 VDC
140 W maximum
14 AWG
Number 1 Phillips screwdriver
Wire cutters to cut cable tie-wraps
ESD-preventive wrist strap
Slot 2
2E
WO
2W W1
DO NOT INSTALL WAN INTERFACE
CARDS WITH POWER APPLIED
SERIAL
STP
AUI
EN
ETHERNET 1
ETHERNET 0
Slot 0
1
2
SERIAL
AUI
EN
INPUT 100-240V AC 50/60HZ 3.0-1.5 AMPS
Power supply