Cisco 3600 Series Configuration Note - Page 15

Browse online or download pdf Configuration Note for Gateway Cisco 3600 Series. Cisco 3600 Series 18 pages. Memory upgrade
Also for Cisco 3600 Series: Product Overview (10 pages), Upgrade Instructions (30 pages), Owner's Manual (17 pages), Application Note (41 pages), Configuration Manual (36 pages), User Manual (25 pages), Appendix (15 pages), User Manual (7 pages), Manual (5 pages), Configuration Note (23 pages), Configuration Note (25 pages)

Print Page

Figure 26

ACTIV E

READ Y

Note: The second bracket attaches to the other side of the chassis.

Mounting the Cisco 3640 Router on the Wall

After fastening the brackets to the chassis, follow this procedure to mount it on the wall (see

Figure 27):

Step 1

Step 2

Caution

Step 3

Step 4

Step 5

Cisco 3640 Wall-Mount Bracket Attachment

1 2 3

PCM CIA

Using the brackets as a pattern, mark and drill holes on the board where you will fasten

the router. Do not attach the router to the board yet.

Locate the wall studs where you plan to attach the router.

The router must be fastened securely to two studs.

Drill wall-mount screw locations through the plywood board and studs.

Plan to mount the router so that the front and rear of the chassis are perpendicular

Note

to the ﬂoor, with the front upward and at eye level, so you can read the LEDs.

Mount the plywood board to the wall, using your own 3/16 x 2 1/2-inch or larger wood

screws.

Using your own screws, approximately #6 x 1/2-inch (depending on the thickness of the

board), fasten the router to the board by the mounting brackets.

Cisco 3600 Series Rack-Mount and Wall-Mount Configuration Note

Wall-Mounting the Router